Placing the outdoor modules can in some cases be a difficult job, especially in the case of the rain and wind meter. Once installed and set up, the Netatmo Smart Weather Station provides you with a very solid and reliable weather station. The rain and wind meter are also visible in the Home app but cannot be used further. This is because Homekit does not (yet) support such sensors.If you want to be able to use all measurement data, you can choose to connect the weather station with the Athom Homey. This can use all measurement data for automations, unlike Homekit. The temperature and humidity values (inside and outside) can be viewed in the Home app. However, no automations can be activated on this within Homekit. This is possible on the basis of air quality and carbon dioxide. Consider, for example, switching off the heating when the carbon dioxide content in a room is too high. The Netatmo Smart Weather Station also has support for Homekit. This function can be activated from the settings in the Netatmo weather app. After the link with Homekit, various sensors appear in the Home app for iOS and macOS. If you do not want to wait for the next measurement, you can press the top of the indoor module. This forces a manual measurement, unfortunately this option is missing from the Netatmo weather app itself. You will receive the notifications within 10 minutes after a threshold has been reached. The indoor module processes the measurement data from the other modules once every 10 minutes. Because this refresh time is used, the outdoor modules have a battery life of at least 1 year.Īn exception to the refresh time is the rain gauge. Data is only sent to the indoor module when this measures precipitation. If rain is detected, this will be notified immediately via a notification. This means you are exactly on time to collect the laundry on time. The Netatmo weather app can also send you notifications when certain values are reached. There are 12 standard messages that you can activate or deactivate, such as a message when it starts to rain or when the carbon dioxide content in the room exceeds a certain value. In addition to the standard notifications, it is also possible to create notifications based on your own values. Receive notifications:Netatmo weather station You can also invite other people to view the weather measurements via the Netatmo weather app. The most important settings of the weather station can also be accessed via the menu in the app. Here you can edit the names of the modules and view their status, including the connection to the other modules and the battery. You also have the option to calibrate the various sensors here. The menu in the app also gives you access to the weather map. This is a map view with all sensors that are present in your immediate vicinity. This allows you to compare the measurement data with that of other Netatmo weather station users. The top half of the screen shows the measurements from the outdoor module, including air quality (ozone), temperature, air pressure, air humidity, millimeters of precipitation, wind direction and strength. The Netatmo weather app that you use to view the measurement results is a clear and well-arranged app. After starting the app, all information collected by the Netatmo indoor and outdoor modules appears immediately . You can calibrate the rain gauge by pouring 100 ml of water very slowly into the rain gauge and counting the number of tilts of the receptacles. Then divide 100 by the number of tilts of the receptacles. You enter the result in the app in the calibration options.īy applying the above technique, drizzle may not be detected. In that case, the number of drops is probably too few for a good measurement, or the drops dry too quickly. You can provide the modules with their own name so that they are easy to recognize in the additional results. The app also offers the possibility to calibrate the various sensors. This includes calibrating the temperature measurements, setting the height of the anemometer and calibrating the rain gauge. In the app, the various modules can be linked to the indoor module by means of a few steps. It is possible that this does not work immediately the first time and that a second attempt is required. You need the Netatmo weather app to link the various modules and view the measurement results. This app is available for iOS and Android users. After creating an account you can start configuring your weather station. Configure modules:Netatmo weather station The rain and the anemometer are supplied without mounting bracket. You have to purchase these separately. Both meters are threaded (1/4-inch) which is also used by tripods and tripods. This makes it possible to mount both meters on a standard IP camera bracket.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |